Playback Operation - LENCO MES-210 Instruction Manual

Playback Operation

READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING YOUR DVD
PLAYER FOR THE FIRST TIME.
WARNING: Do not play poor-quality discs to avoid damaging the lens.
Pre-operation
1. Connect the unit to power supply through the provided DC adaptor.
2. Switch POWER ON/OFF to ON on the left panel to turn on the DVD player.
3. Press the OPEN button on the unit to open the disc tray cover and then put a disc in
the disc tray with printed side facing up. Close the disc cover. (See below)
4. The player will search disc and play it automatically.
5. Adjust the volume with the VOLUME control on the right panel to the desired level.
6. To turn the player off, switch the POWER ON/OFF on the left panel to OFF .
Using of General Button
FUNC
button
Press the FUNC button to change the brightness and
color level. Adjust these values with the + and - buttons
on the front panel. Press and hold the FUNC button for
about 1 or 2 seconds to change the aspect ration
between 16:9 and 4:3. See the below for details:
17