System Setup - LENCO MES-210 Instruction Manual

You can change the default settings of this unit to customize its performance to your own
preference. Read this section to learn how to set up the system.
Note: the system should only be set up in the state that no disc (the disc tray should be
closed) is in the DVD drive or the unit is in the completely stop mode.
Follow the steps below to set up your system:
1. Press the SETUP button.
The setup menu will appear on the screen. It includes language setup and preferences.
You can exit from the setup menu by pressing SETUP button again at any time during
the setting.
2. Press the
3. Press the
Language Setup
or buttons to select a sub-menu that you want to set up.
or buttons to select the item that you want to set up in the sub-menu.

System Setup

Press the SETUP button, then the screen will
display as the left.
1. OSD LANG
This item is used to set the OSD (on-screen
display) language. Press the
of this item.
There are eight languages for you to choose.
Press the or button to choose the proper one.
Press the ENTER/ENT to confirm your selection.
Press the to exit from this item.
26
to enter the setup