Subscribe to Our Youtube Channel
Related Manuals for Hunter 52849
Summary of Contents for Hunter 52849
- Page 1 Erling Installation Manual Model: 52849 Luxe Gold 52850 Matte Black 52851 Fresh White Fan weight ±2 lbs: 16.8 lbs (7.6 kg) ©2024 Hunter Fan Co. PG4188 r041224...
- Page 2 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. c.2 - Use only Hunter replacement parts. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 3 We recommend that you pull everything out of the box and lay it out. We have grouped the drawn components below with the hardware you’ll need for those Hunter Pro Tip: parts. The screws below are drawn to scale to make it easier to identify what piece of hardware is needed to install each component.
- Page 4 A little more information on Angled Mounting: For optimum performance and appearance, a longer downrod should be used with your Hunter ceiling fan when installing on high or angled ceiling. If your ceiling is angled greater than 34° you will also need an Angled Mounting Kit.
- Page 5 You have two options for installation. Pick which one works best for your location. Remove any existing Hunter Pro Tip: bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan’s box. The machine screws are the ones that came with your outlet box.
- Page 6 1886 Installing the Downrod Follow below if you are using the downrod that came pre-assembled in your box. Need to install a longer or shorter downrod? Check out the guide at the end of this manual. DO NOT NOTICE REMOVE SETSCREW COMPLETELY To prevent damage to fan,...
- Page 7 1886 Making Connections for the Receiver and the Fan From receiver From receiver From fan From fan Connect wiring harness from ceiling Connect both wiring harnesses from fan to Connect the grounding wire plug from the bracket to the wiring harness from the the wiring harness from the receiver.
- Page 8 1886 Installing the Blades: Place each blade between a blade iron and medallion. Install three blade screws, Blade Screw found in the hardware bag, to attach the medallion to the blade iron. Repeat this step for each blade. Repeat x5 Blade Medallion Note: Fan style may vary.
- Page 9 1886 Assembling the Light Kit 1 of 3 2 of 3 Light Kit Screw Light Kit Screw Insert the third screw, found in the hardware Feed the wire plugs through the center bag, into place and then Partially install two light kit hole of the upper switch housing, then tighten all three screws.
- Page 10 1886 Preparing the Remote NOTICE The remote control is already paired for use. For your convenience, a remote function card is packed in with your remote. • Always purchase the correct size and grade of battery most suitable for the intended use. Remote Function Guide To close the battery compartment, Key Press...
- Page 11 1-888-830-1326 use of improper parts or accessories, failure to provide maintenance to the fan, or acts of Please do not ship your fan or any fan parts to Hunter. Delivery will be refused. God (e.g. flood). ORIGINAL PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR A CLAIM OF ANY KIND What Does This Warranty Cover? WITH RESPECT TO THIS PRODUCT SHALL BE THE REMEDIES SET FORTH HEREIN.
- Page 12 1886 Downrod If you need a different downrod length follow these steps: WARNING FAN FALL HAZARD To prevent SERIOUS INJURY or DEATH: • ALWAYS tighten setscrew with pliers. • DO NOT hand tighten setscrew. • CHECK the setscrew is tight using pliers each time you change fan direction.
Need help?
Do you have a question about the 52849 and is the answer not in the manual?
Questions and answers