Presetting Stations - Aiwa LCX-357 Operating Instructions Manual

PRESETTING STATIONS

s
1
d
3
2
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in a preset station directly.
1 Press TUNER/BAND repeatedly to select a band.
Or press BAND on the remote control repeatedly.
2 Press f or g to select a station.
3 Press a to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Frequency
4 Repeat steps 1 to 3.
The next station will not be stored if a total of 32 preset stations
have already been stored.
NOTE
Each band can only store a maximum of 16 preset stations.
0-9,+10
BAND
f,g
Preset number
PRESET NUMBER TUNING
1 Press TUNER/BAND to select a band.
Or press BAND on the remote control.
2 Press d.
Each time the button is pressed, the next ascending preset
number is selected.
Tuning by preset number
1 Press TUNER/BAND to select a band.
2 Press the numbered buttons on the remote control to select a
preset number.
Example:
To select preset number 10, press +10 and 0.
To select preset number 15, press +10 and 5.
To clear a preset station
Select the preset number of the station to be cleared. Then, on
the main unit, press s and press a within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
En
9
ENGLISH