Specifications - Aiwa LCX-357 Operating Instructions Manual

SPECIFICATIONS

MAIN UNIT
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Input
Outputs
Cassette deck section
Track format
Frequency response
Recording system
Heads
Compact disc player section
Laser
D-A converter
Wow and flutter
SPEAKER SYSTEM
Speakers
Impedance
Dimensions (W H D)
Weight
20
ENGLISH
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 µV/m
Loop antenna
5.5 W + 5.5 W
(100 Hz to 15 kHz, THD less than
1%, 4 ohms)
7 W + 7 W
(100 Hz to 15 kHz, THD less than
10%, 4 ohms)
AUX: 500 mV
SPEAKERS: accept speakers of
4 ohms or more
PHONES (stereo minijack):
accepts headphones of 32 ohms or
more
4 tracks, 2 channels stereo
Normal tape: 50 Hz – 15000 Hz
AC bias
Recording/playback 1
Erase head 1
Semiconductor laser ( = 780 nm)
1 bit linear
Unmeasurable
100 mm cone type
4 ohms
140 231.5 198 mm
5 1 7
(5 / 9 / 7 / in.)
8 8 8
1.1 kg
(2 lbs 7 oz)
GENERAL
Power requirements
Power consumption
Dimensions of main unit
(W H D)
Weight of main unit
Specifications and external appearance are subject to change without
notice.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause har mful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's
right or authority to operate this product.
120V AC, 60 Hz
26 W
160 231.5 197 mm
(6 3 / 9 1 / 7 7 / in.)
8 8 8
2.5 kg
(5 lbs 8 oz)