en Appliance door
Lift out the intermediate pane and set it down care-
8.
fully on a flat surface.
If necessary, you can remove the condensate
9.
trough for cleaning.
Open the appliance door.
‒
Tilt the condensate trough upwards and remove
‒
it.
10.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
Do not use any harsh or abrasive cleaners or
▶
sharp metal scrapers to clean the glass on the
oven door, as they may scratch the surface.
Clean the removed door panels on both sides with
glass cleaner and a soft cloth.
Clean the condensate trough with a cloth and hot
11.
soapy water.
Clean the appliance door.
12.
→ "Suitable cleaning agents", Page 14
Dry the door panels and refit them.
13.
→ "Fitting the door panes", Page 18
14.4 Fitting the door panes
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
Open the appliance door fully.
1.
18
Place the condensate trough vertically into the re-
2.
tainer
and turn it downwards.
Slide the intermediate pane into the left- and right-
3.
hand retainers .
Push the intermediate pane upwards until it is in the
4.
left- and right-hand retainers .
Open the appliance door and attach the door seal.
5.
Need help?
Do you have a question about the HQA 34B 3B Series and is the answer not in the manual?
Questions and answers