Backing Vocals; Installing The Pb 1000 - AKG LC User Instructions

3.5 Backing Vocals

Fig. 3: Two
vocalists sharing
a microphone.
3.6 Installing
the PB 1000
Fig. 4: Microphone cap-
sule without (1) and
with (2b) PB 1000.
Refer to fig. 4.
L
Important!
18
3 Using Your Microphone
the microphone channel far enough to create a feedback
problem.
(1)
1. Unscrew and remove the wire mesh cap.
2. Slip the PB 1000 on the micro phone capsule to the stop,
slightly turning the attachment as you push it home.
• When installing or removing the PB 1000, make sure to
grip the capsule and shock mount firmly with your
thumb and forefinger in order to prevent the capsule
being severed from the shock mount.
1. Never let more than two
persons share a micro-
phone.
2. The microphone is very in-
sensitive to off-axis sounds.
If the two vocalists were to
sing into the microphone
from an angle wider than
35 de-grees, you may end
up bringing up the fader of
2a 2b
LC