ALGE-Timing StartLiner TIMY2 Manual page 3

1 Control Elements
2 Program Description
ALGE-TIMING has developed software that allows you to control several D-LINE boards for
cross country or Nordic combined races at the start. One display board shows the time of day
or running time after the first start, and then you have up to 6 boards for each start track. On
these six boards you show the countdown independently from the other start track for the next
racer starting on this track.
3 Where to use this program?
This program is very useful for races where you have a different start delay for each racer.
This allows you to make several start tracks. It is used for cross country skiing and Nordic
combined races.
4 Operating
You can download via the RS232 interface the start times for each track from software (not
from ALGE). After synchronizing the Timy2, the output will start automatically.
Normally you have two display boards for each track (D-LINE with 6 digits).
Manual
TIMY2 – StartLiner
1 ......... USB-interface
2 ......... Charging socket
3 ......... ALGE multiport
4 ......... Connection for display board
5 ......... Connection for start emitter (C0)
6 ......... Connection for finish emitter (C1)
7 ......... Standard ALGE photocell socket
Page 3