Veris TW2 Series Installation Manual

Installation Guide
Temperature
TW2X
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classi ed locations.
• Read and understand the instructions before installing this product.
• Turn o all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
If this product is used in a manner not speci ed by the manufacturer, the protection
provided by the product may be impaired. No responsibility is assumed by the
manufacturer for any consequences arising out of the use of this material.
Z207939-0D Page 1 of 3
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Wall Mounted Temperature Sensors
Product Overview
TW2x Series Living Space Resistive Temperature Sensors are available in several RTD/thermistor types with the
same look and feel as Veris CW2, HW2 and TW2 sensors. The TW2X Series sensors provide a low cost option for
measuring temperature in a room.
Product Identification
Sensor Type
TW2XAX
C = 1000 PT RTD
D = 10K T2 Thermistor
H = 10K T3 Thermistor
K = 10K Curve G/11K Shunt
M = 20K NTC Thermistor
N = 1.8K TAC Thermistor
Specifications
Operating Temperature 0 to 50 °C (32 to 122 °F)
Operating Humidity Range 0 to 95% RH, non-condensing
Housing Material High impact ABS plastic, flammability rating UL 94 V-0
Mounting Location Not suitable for wet locations. For indoor use only.
Mounting Location For indoor use only. Not suitable for wet locations.
Surface Mount The device can be surface mounted on Single Gang J-Box, British Standard and
Two Screw Terminals 18-22 AWG, two-wire thermistor
Agency Approvals UL 916,
©2022 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
TW2X Series
TEMPERATURE SENSOR
Type RTD/thermistor
OPERATING ENVIRONMENT
IP Rating IP 30
CE60 wall boxes
WIRING
REGULATORY INFORMATION
European conformance CE:
EN61000-6-3
EN61000 Series - industrial immunity standard
FCC Part 15 Class B, REACH, RoHS, RCM (Australia), ICES-003 (Canada)
0422