Common Desktop Environment (Cde); Setting Bit-Depth - Tech Source RAPTOR DL-LITE - DRIVERS FOR SOLARIS INSTALLATION-REFERENCE Installation And Reference Manual

Raptor DL-Lite Drivers for Solaris Installation and Reference Manual
4.2

Common Desktop Environment (CDE)

Common Desktop Environment (CDE) is available with Solaris 2.5
and higher versions and it is independent of the Raptor software.
If you have installed CDE and would like the CDE login screen to
appear on the Raptor display, you will need to change your
/etc/dt/config/Xservers file to include the following line:
:0 Local local-uid@console root \
/usr/openwin/bin/Xsun :0 -dev /dev/fbs/rapdlt0
You may add any other command line arguments to the end of
the line. In addition, since the graphics devices are dynamically
allocated during each reconfiguration boot, you should check your
/dev/fbs directory for the name of your Raptor device (e.g.
rapdlt0 or rapdlt1, etc.) and modify the Xservers file
accordingly.
When dtlogin is started, a login screen will appear on the
Raptor display. A user may log in on this display using the
console keyboard and mouse.
4.3

Setting Bit-Depth

Raptor DL-Lite cards support 8-bit, 24-bit, 8+8-bit, 8+24-bit,
mox16, mox24 and mox32 modes. By default X Windows comes
up in 8-bit mode on these cards. The bit-depth can be selected
by using the dltconfig utility (see Section 3.4).
For an explanation of the various MOX modes, please see
Section 4.4.
4-2