Tech Source RAPTOR DL-LITE - DRIVERS FOR SOLARIS INSTALLATION-REFERENCE Installation And Reference Manual page 15

The Raptor device(s) will be listed in the left column of the
configuration screen displayed by dltconfig. (See Figure
3.1).
A description of the commands is as follows:
Up/Down Arrow
Left/Right Arrow
Space Bar
Chapter 3 – Software Installation
Figure 3.1 dltconfig
selects the desired graphics
device to modify
selects the parameter to modify
(e.g. resolution, bit-depth, or
sync)
modifies the parameter for the
selected graphics device (will
bring up
applicable)
3-5
a menu when