1
GORĄCA WODA / WANNA MEMORY CAST
PL:
HOT WATER / MEMORY CAST WATER BATH
EN:
1. PL: Wlej wodę do wanny i podgrzej do temp. 60-65
EN: Pour water into the bath and heat it up to 60-65
3. PL: Umieść całą ortezę w wannie z wodą, zamknij pokrywę wanny i odczekaj chwilę aż orteza
zmięknie.
EN: Place the product in a bath filled with water, close its cover and wait a moment until the Memory
Cast Panel is plastic.
4. PL: Gdy płyta stanie się całkowicie plastyczna,
osusz ortezę ręcznikiem.
EN: When the panel is completely flexible, dry
the orthosis with a towel.
PL: UWAGA! Zamiast wanny można zastosować pojemnik z gorącą wodą.
EN: ATTENTION! Instead of a bath, you can use a bowl of hot water.
METODY PODGRZEWANIA PŁYTY MEMORY CAST
METHODS TO HEAT UP MEMORY CAST PANEL
0
0
5. PL: Sprawdź czy orteza nie jest zbyt gorąca.
EN: Check if the orthosis is not too hot.
C.
2. PL: Rozepnij i poluzuj zapięcia rzepy
C.
ortezy.
EN: Open and loosen the Velcro
fasteners of the orthosis.
Jeśli to konieczne, poczekaj aż ostygnie.
If so, wait for it to cool down.
© Reh4Mat 07/2022
Need help?
Do you have a question about the AS-SS and is the answer not in the manual?
Questions and answers