Maple Systems cMT Series Quick Start Manual page 23

cMT Series Quick Start Guide
Settings Menu
Touch the 'gear' icon at the top right part of the screen to open the Settings menu.
The 'closed' padlock on the Setting tab indicates that security is in place, and only the System password
can be changed. The current System password is required to change the password.
Note: The default System password is 111111. If the user forgets the password to get into the system
settings on cMT-iV5, the password can be reset by entering: 'default111111'. This erases any uploaded
projects stored on the cMT-iV5 and resets the password to 111111. This operation does not erase the
project on the cMT server device.
The password provides access to: HMI name, Direction (landscape/portrait), Time / Date settings, and
Network Settings.

The Information tab displays the current configuration.

The General tab allows changing of the password (current password required) and adjusting the
brightness, audio output level, and backlight saver (no password needed).

The Language tab selects the language that is displayed by the cMT Viewer's menus and
selections. Languages used by the cMT project are specified in the project itself.

The Input Method tab selects the language that is used to enter data into the cMT-iV5 and
provides access to international keyboards.
Note: International keyboards are selected with the "Earth" key on the pop up keyboard.
cMT Series Quick Start Guide
23
23