Lucky FF918-CWLS Operation Manual

Bait boat fish finder, 300m wireless range

Advertisement

FF918-CWLS Bait Boat Fish Finder
300M Wireless Range Operations Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FF918-CWLS and is the answer not in the manual?

Questions and answers

Summary of Contents for Lucky FF918-CWLS

  • Page 1 FF918-CWLS Bait Boat Fish Finder 300M Wireless Range Operations Manual...
  • Page 2 Thank you for choosing FF918-CWLS bait boat fish finder. This bait boat fish finder is the ultimate edition fishing sonar in LUCKY fish finder family. Which comes with different base support options. The 100m detective depth will satisfy most of anglers who want to go fishing on their boats.
  • Page 3: Display View

    2. Use the Wireless sensor mode his FF918-CWLS fishfinder is designed to be used with a bait boat. Only simply install the Long-distance signal tower to your bait boat, power on the signal tower, then enjoy fishing with your fish finder.
  • Page 4 FF918-CWLS you need some experience and interpretation. Use picture as a guide in most common conditions and use FF918-CWLS to explore unknown underwater types. 1-Battery Capacity 8-Signal Indicator 2-Depth Upper Range 9-Sensitivity 3-Water Surface Line...
  • Page 5: Power On/Off

    5.Power ON/OFF Press the POWER-MENU botton for 3 seconds and release it to power on the FF918-CWLS. Press and hold the POWER-MENU key until the dispaly goes off to power off the FF918-CWLS. 1-Up arrow key 4-Sensitivity key 2-Mode key...
  • Page 6: The Menu System

    When the FF918-CWLS is turned on, the will 918-CWLS temporarily on the screen and last for 3 seconds.Then it START UP will show up START UP You can use the arrow keys to select either Start-Up or Simulation. If you do nothing, the unit will default to normal mode when use it on the water.
  • Page 7 saved and will not return to their default values when the device is turned off. For more information, see the individual menu options . NOTE: Each time the POWER-MENU key is pressed, the backlight momentarily illuminates for easy viewing at night.
  • Page 8 may not show many sonar returns that could be fish. Sensitivity levels from 1 to 9 (1 –9). 6.3 Depth low Limit --- DE TH LOW LIMIT AUTO AUTO 1 0 0 Press the POWER - MENU key until DEPTH LOW LIMIT appears.
  • Page 9 6.5 Shallow Alarm --- SHALLOW ALARM Press the POWER-MENU key until Shallow Alarm appears. Select OFF for no depth alarm, or select 1 to 100 meters to set the alarm depth. An audible alarm sounds when the depth is equal to or less than the setting. (Off, 1-100) 6.6 Fish Icon --- FISH ICON Make sure to press the POWER-MENU key until FISH ICON...
  • Page 10 Press the POWER-MENU button until FISH ALARM appears. Select Off means you don't need a fish alarm,or choose the corresponding symbol as below to set a fish alarm. FF918-CWLS An alarm is issued when the detects a fish corresponding to the setting.Fish alarm will only sound when Fish icon is setted to On.
  • Page 11 6.10 Battery Alarm --- BATTERY ALARM 13.5 Make sure to press the POWER-MENU key until Battery Alarm appears. OFF means no battery alarm is setted or choose 8.6 to 13.5 Volts to set the alarm. Battery Alarm sounds when the input battery voltage is equal to or less than the setting.
  • Page 12 9 is the fastest chart speed. (1 to 9) 7 Maintenance Follow these simple procedures to ensure your FF918-CWLS continues to deliver top performance. 7.1 If the unit comes into contact with salt spray, wipe the affected surfaces with a cloth dampened in fresh water.
  • Page 13: Problem And Solution

    extremely high temperatures generated in hot weather can damage the electronics. 8. Problem and Solution 1.The FF918 lost signal in wireless User Mode. If the FF918 work in Wireless mode, it is not able to get a RF signal from the Wireless sonar sensor, the display will stop updating and the NO SIGNAL will be showed after several seconds.
  • Page 14 3)Reeling the Wireless sonar sensor too fast can cause loss of signal and the screen will freeze. 4)The Wireless sonar sensor may not obtain its maximum RF distance of 980 feet unless the water is smooth. Waves or chop may reduce the RF range significantly. 5)When in very shallow water, I get gaps in the bottom reading and inconsistent digital depth indication.
  • Page 15: Product Specifications

    the radio signal from the Wireless sonar sensor is lost and then regained in rough water conditions. 9. PRODUCT SPECIFICATIONS 1)Display:3.5inch TFT LCD 2)Sonar operation frequency:200KHz 3) Back lighting: On/off White LED 4) Power requirement:11-13.5V DC 5) Sensor coverage: 45 degrees 6) Depth range max/min: 328ft (100m) / 3 ft (1m) 7) Operational range: 980 ft (300 m) 8) Operational wireless frequency: 433.92 MHz...
  • Page 16 MADE IN CHINA MANUFACTURER: JINHUA LUCKY ET MANUFACTURER CO.,LTD.

Table of Contents

Save PDF