Connecting The Monitor To A Power Source - Sharp LL-171MU Operation Manual

Connecting the monitor to a power source

CAUTION!
- When connecting, ensure that the monitor is switched off.
- Always use the AC adapter that came with the monitor.
- Be careful not to over bend the cable or add extension cords as this could lead to a malfunction.
See page E6 for information on removing/replacing the terminal cover.
1. Connect the AC adapter to the power input terminal.
Power input terminal
AC adapter
2. Plug the power cord into the AC adapter and then place the power plug into an AC outlet.
Power cord
AC outlet
AC adapter
Note:
- The shape of the power cord may vary in some countries.
E14