Using The Setup Menu; Setting Sounds - Sanyo VPC-E1500TP Instruction Manual

Using the Setup Menu

You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows you to configure general camera settings.
To go to Setup Menu:
1. Tap the onscreen Menu button to launch the
Record/Playback Menu.
2. Tap the tab button
3. Tap or to turn pages.
4. Tap the desired option button to enter submenu.
5. Configure the settings in the submenu.
6. Tap the onscreen
changed settings.
7. Tap the or
return main menu anytime.

Setting Sounds

Use the option buttons to control the sounds produced by the camera.
1. From the Setup menu, tap to select Sounds.
2. Configure settings by tapping the option button.
3. Tap the
Item Available Settings
Sound 1, Sound 2,
Startup
Sound 3, Off
Shutter On, Off
Beep On, Off
to launch Setup menu.
button to save and apply
button to exit the menu or
button to apply.
Selects the startup sound when camera is turned on.
Enables or disables shutter sound when shutter button is
pressed. Shutter sound is not available when recording
videos or voice clips.
Enable or disable the beep sound when using touch screen.
Description
83