Sanyo VPC-E1500TP Instruction Manual page 109

Be careful of condensation under the
following conditions
• When moving the camera suddenly from a
cold place to a warm place.
• When the ambient temperature changes
drastically, such as when a heater is turned
on to quickly heat the room.
• When the camera is placed in the path of
cool air from an air conditioner.
• When the camera is placed in a location of
high humidity.
Caution concerning undesired
■
interference
• The camera may create undesired
interference if used close to a television or
radio. To avoid this type of interference,
make sure the cores on the supplied cables
are not removed.
Dedicated USB interface
cable
Core
* The type (shape) and quantity of cable(s)
supplied may differ depending on which
product was purchased.
• If the docking station or AC adaptor/charger
is used in close proximity to a radio or TV
set, it may cause interference such as static
in AM broadcast signals or noise in the TV
image. In this case, increase the distance
between the radio or TV and the device.
Caution concerning magnetism (for
■
cameras with a speaker)
• Do not place credit cards, bank cards, floppy
disks, or other items that may be damaged
by magnetic fields near the speaker. Data
may be lost or the magnetic strips on cards
may be damaged.
Cautions concerning data storage
■
• It is recommended that any important data
be copied onto a separate media (such as a
hard disk, MO disk, or CD-R disk).
• Stored data may be lost (or corrupted) in
cases such as those listed below.
■
Dedicated S-AV
interface cable
Core
108
• Sanyo Electric will not be held responsible for
any damage or lost profits arising from the
loss of data.
• If the card is used incorrectly.
• If the card is not inserted correctly into the
camera.
• If the card is subjected to electrical or
mechanical shocks or other forces.
• If the card is removed from the camera or
if the camera is turned off during reading
or writing operations.
• If the card has reached the end of its
usable life.
Caution concerning rise in battery
temperature (automatic power OFF
safety feature)
• If the battery temperature should rise to a
specific level while the camera is in use, a
icon will blink on the monitor.
Recording and playback are possible even
when the icon is blinking; however, it
is advised that in this situation you
discontinue using the camera and turn it off
as soon as possible.
• If the battery temperature rises further while
the icon is blinking, the safety feature
will operate to automatically turn off the
camera, and recording and playback will not
be possible. If this happens, the camera
cannot be turned on until the battery
temperature has fallen. Please wait for the
battery to cool down before using the
camera again.