Sanyo VPC-E1500TP Instruction Manual page 82

Startup Image
You can specify the startup image from the captured images for camera.
To set startup image:
1. Set the camera to Playback mode and tap the
onscreen Menu button to launch playback menu and
tap Startup Image
2. Tap the or
options as follow:
• System: Built-in image.
• My Photo: Tap the
desired image.
• Off: Turn off the startup image display.
3. Tap the on screen System/My Photo/Off button to
apply the setting.
The startup image will still be displayed startup even if the selected image was
deleted.
DPOF
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing
information on your memory card. You can select the images to be printed and how many prints to
make with the DPOF menu in the camera and insert the memory card to the card compatible printer.
When the printer starts printing, it will read the embedded information on the memory card and print
the specified images.
To set DPOF:
1. Set the camera to Playback mode and tap the
onscreen Menu button to launch playback menu.
2. Tap to select DPOF. Available settings are as follows:
• Single. Select a single image to mark.
• All. Mark all images in the memory card.
• Reset. Reset all DPOF settings to initial settings.
.
button to switch startup image
or button to select
81