Battery And Charger - Sanyo Zio User Manual

without your intervention. When a signal is found, your
device automatically returns to standby mode.
Tip:
The Power Save feature conserves your battery power
when you are in an area where there is no signal.
Turning Your Device Off
1.
Press and hold
window appears.
Phone options
2.
Touch >
Power off

Battery and Charger

WARNING:
Use only Sprint-approved or Kyocera-approved
batteries and chargers with your device. The
failure to use a Sprint-approved or Kyocera-
approved battery and charger may increase the
risk that your device will overheat, catch fire, or
explode, resulting in serious bodily injury, death,
or property damage.
Sprint-approved or Kyocera-approved batteries and
accessories can be found at Sprint Stores or through
Kyocera; or call 1-866-866-7509 to order. They are also
available at
www.sprint.com
14 2A. Device Basics
for two seconds. The
to turn the device off.
OK
.
Battery Capacity
Your device is equipped with a Lithium Ion (Li-Ion)
battery. It allows you to recharge your battery before it is
fully drained. The battery provides up to 4.6 hours of
continuous digital talk time.
When the battery level drops to 10%, the LED indicator
begins flashing red. When the battery level drops
below 5%, the battery icon changes to
up window warns you that the battery is low. When the
battery level drops to approximately 1%, the device
shuts down.
Note:
Long backlight settings, searching for service, vibrate
mode, browser use, and other variables may reduce
the battery's talk and standby times.
Tip:
Watch your device's battery level indicator and charge the
battery before it runs out of power.
Installing the Battery
See "Setting Up Your Device" on page 2.
Removing the Battery
1.
Make sure the device is off so that you do not lose
any stored numbers or messages.
and a pop-