Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Harley Benton FRFR-112A Guitar DSP
Summary of Contents for Harley Benton FRFR-112A Guitar DSP
- Page 1 FRFR-112A Guitar DSP Guitar Combo...
- Page 2 Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 21.10.2024, ID: 478594 (V3)
-
Page 3: Table Of Contents
1.1 Symbols and signal words....................... 5 Safety instructions............................. 7 Features............................... 10 Starting up..............................11 Connections and controls........................13 DSP functions............................15 Technical specifications........................21 Plug and pin assignments........................23 Cleaning............................... 26 Protecting the environment......................27 FRFR-112A Guitar DSP Guitar Combo... - Page 4 FRFR-112A Guitar DSP Guitar Combo...
-
Page 5: General Information
Please refer to the latest version of the documentation, which is ready for download under www.thomann.de. 1.1 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this document. FRFR-112A Guitar DSP Guitar Combo... - Page 6 This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided. Warning signs Type of danger Warning – high-voltage. Warning – danger zone. FRFR-112A Guitar DSP Guitar Combo...
-
Page 7: Safety Instructions
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device when covers, safety equipment or optical components are missing or damaged. FRFR-112A Guitar DSP Guitar Combo... - Page 8 (FI). Ensure that the power cord plug is easily accessible at all times if it is the only device to safely disconnect the device from the mains supply. As a precaution, disconnect the device from the power grid when storms are approaching or it the device will not be used for a longer period. FRFR-112A Guitar DSP Guitar Combo...
- Page 9 The plasticiser contained in the rubber feet of this product may react with the coating of the floor and cause permanent dark stains after some time. If necessary, use a suitable mat or felt slide to prevent direct contact between the product’s rubber feet and the floor. FRFR-112A Guitar DSP Guitar Combo...
-
Page 10: Features
Suitable for use as floor monitor or on a stand 2 × XLR / 6.35-mm jack combo socket as adjustable MIC/line input 1 × 3.5-mm jack socket as AUX input for connecting line devices 1 × XLR output Optional matching cover (item no. 410589) FRFR-112A Guitar DSP Guitar Combo... -
Page 11: Starting Up
Speakers generate a static magnetic field. This magnetic field can affect other neighbouring units and in unfavourable cases damage them. Ensure that speakers are always a sufficient distance away from sensitive equip‐ ment that may be affected by an external magnetic field. FRFR-112A Guitar DSP Guitar Combo... - Page 12 Only use stands whose maximum bearing capacity is at least as high as the weight of the device. Always ensure that the stand is stable. The device can be mounted on a stand or set up on the floor or a sufficiently sized and stable surface. FRFR-112A Guitar DSP Guitar Combo...
-
Page 13: Connections And Controls
Connections and controls Connections and controls ö FRFR-112A Guitar DSP Power Input: 230V~50Hz T3.15AL250V Fuse: & FRFR-112A Guitar DSP Guitar Combo... - Page 14 The device automatically turns back on again when the input signal returns. This LED lights up when the automatic shutdown function is active. [POWER ON / OFF] | Main switch. Turns the device on and off. FRFR-112A Guitar DSP Guitar Combo...
-
Page 15: Dsp Functions
Turn [MASTER | PUSH FOR DSP] until the display shows ‘Sim1’ , ‘Sim2’ , ‘Sim3’ (simulation of three different guitar sounds) or ‘OFF’ , and press [MASTER | PUSH FOR DSP] to confirm. ð The selected sound program is set. FRFR-112A Guitar DSP Guitar Combo... - Page 16 Turn [MASTER | PUSH FOR DSP] until the display shows ‘EQ TYPE’ and press [MASTER | PUSH FOR DSP] to confirm. Turn [MASTER | PUSH FOR DSP] until the display shows ‘GUITAR1’ or ‘GUITAR2’ and press [MASTER | PUSH FOR DSP] to confirm. FRFR-112A Guitar DSP Guitar Combo...
-
Page 17: Frequency Band
‘EQ 2K4Hz’ 2.4 kHz ‘GUITAR2’ ‘EQ 200Hz’ 200 Hz ‘EQ 400Hz’ 400 Hz ‘EQ 800Hz’ 800 Hz ‘EQ 1K6Hz’ 1.6 kHz ‘EQ 3K2Hz’ 3.2 kHz ‘EQ 6K4Hz’ 6.4 kHz ð The selected EQ set is set. FRFR-112A Guitar DSP Guitar Combo... -
Page 18: Dimming The Display
Turn [MASTER | PUSH FOR DSP] until the display shows ‘BRIGHT’ and press [MASTER | PUSH FOR DSP] to confirm. Turn [MASTER | PUSH FOR DSP] to set a value between ‘1’ (low) and ‘10’ (high) and press [MASTER | PUSH FOR DSP] to confirm. FRFR-112A Guitar DSP Guitar Combo... -
Page 19: Setting The Display Contrast
Turn [MASTER | PUSH FOR DSP] until in the display shows ‘Confirm Reset: YES’ , and press [MASTER | PUSH FOR DSP] to confirm. ð The device is reset to factory default settings. To keep the existing settings, choose ‘Confirm Reset: NO’ and press [MASTER | PUSH FOR DSP] to confirm. FRFR-112A Guitar DSP Guitar Combo... -
Page 20: System Information
Press [MASTER | PUSH FOR DSP] to enter the main menu. Turn [MASTER | PUSH FOR DSP] until the display shows ‘INFO’ and press [MASTER | PUSH FOR DSP] to confirm. ð The current firmware version of the DSP function is displayed. FRFR-112A Guitar DSP Guitar Combo... -
Page 21: Technical Specifications
Output power RMS: 300 W Peak: 1200 W Load capacity 1200 W Frequency range 48 Hz…19 kHz, –3 dB Total harmonic distortion (THD) 0.5% (Clean-Sound) Sound pressure level (SPL), max. 134 dB Power consumption 461 W FRFR-112A Guitar DSP Guitar Combo... -
Page 22: Further Information
348 mm × 607 mm × 355 mm Weight 14.6 kg Ambient conditions Temperature range 0 °C…40 °C Relative humidity 20%…50% (non-condensing) Further information Stand flange 35 mm Cover Optionally available (item no. 410589) Speaker simulation FRFR-112A Guitar DSP Guitar Combo... -
Page 23: Plug And Pin Assignments
180°. Since the interference affects both cores equally, by subtracting the phase-shifted signals, the interfering signal is completely neutralized. The result is a pure signal without any noise inter‐ ference. FRFR-112A Guitar DSP Guitar Combo... - Page 24 Plug and pin assignments 1/4" TRS phone plug (mono, bal‐ anced) Signal (in phase, +) Signal (out of phase, –) Ground Three-pole 1/8" mini phone jack (stereo, unbalanced) Signal (left) Signal (right) Ground, shielding FRFR-112A Guitar DSP Guitar Combo...
- Page 25 Plug and pin assignments XLR plug (balanced) Ground, shielding Signal (in phase, +) Signal (out of phase, –) Shielding on plug housing (option) FRFR-112A Guitar DSP Guitar Combo...
-
Page 26: Cleaning
Clean with a dry soft cloth. Stubborn dirt can be removed with a slightly dampened cloth. Never use solvents or alcohol for cleaning. FRFR-112A Guitar DSP Guitar Combo... -
Page 27: Protecting The Environment
Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the instructions and markings on the packaging. Observe the disposal note regarding documentation in France. FRFR-112A Guitar DSP Guitar Combo... - Page 28 Also note that waste avoidance is a valuable contribution to environmental protection. Repairing a device or passing it on to another user is an ecologically valuable alternative to disposal. If your old device contains personal data, delete those data before disposing of it. FRFR-112A Guitar DSP Guitar Combo...
- Page 29 Notes FRFR-112A Guitar DSP Guitar Combo...
- Page 30 Notes FRFR-112A Guitar DSP Guitar Combo...
- Page 32 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...
Need help?
Do you have a question about the FRFR-112A Guitar DSP and is the answer not in the manual?
Questions and answers