General information General information This manual contains important instructions for the safe operation of the unit. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the device. If you sell the unit please make sure that the buyer also receives this manual.
Our online guides provide detailed information on technical basics Online guides and terms. Personal consultation For personal consultation please contact our technical hotline. If you have any problems with the device the customer service will Service gladly assist you. Mighty-5TH...
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
Page 7
NOTICE! This combination of symbol and signal word indicates a pos- sible dangerous situation that can result in material and environmental damage if it is not avoided. Warning signs Type of danger Warning – high-voltage. Warning – danger zone. Mighty-5TH...
Safety instructions Safety instructions Intended use This device is intended to be used for the amplification of signals from musical instruments with electromagnetic pickups. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage.
Page 9
Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. Mighty-5TH...
Page 10
Safety instructions DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord) with a pro- tective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a regis- tered electrician.
Page 11
Keep the device away from naked flames. NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Mighty-5TH...
Page 12
Safety instructions NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user.
Built-in power soak for 1 W and 0.1 W allows for tube overdrive sounds with room volume level 1 channel 5 watt output power 12AX7 preamp tube EL84 power tube Controls for bass, treble and volume Speaker outputs for 8 and 16 Ω Robust metal housing Mighty-5TH...
Installation and starting up Installation and starting up Unpack and carefully check that there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the device against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Connections and controls Connections and controls Mighty-5TH...
Page 16
Connections and controls 1 [INPUT] 1/4" phone socket to connect your instrument. 2 [BASS] Control for boosting / attenuating the low frequencies. 3 [TREBLE] Control for boosting / attenuating the high frequencies. 4 [VOLUME] Volume control. 5 [POWER] Mains switch. Turns the device on and off. 6 IEC chassis plug for connecting the mains cable with fuse holder.
Page 17
Switch to reduce the output power to 1 W or 0.1 W at the 16 Ω-output. If the switch is in the 5 W position, no power reduction takes place. 10 [16 Ω] Output for connecting speaker boxes with 16 Ω impedance. Mighty-5TH...
Technical specifications Technical specifications Output power max. 5 W @ 8 or 16 Ω Operating supply voltage AC 230 V 50/60 Hz Fuse 5 mm × 20 mm, 1 A, 250 V, slow-blow Dimensions (W × H × D) 205 mm × 127 mm × 140 mm Weight 3.2 kg guitar amp head...
Please note these advices, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into the socket, an incorrect connection may result in a destroyed power amp, a short circuit or ‘just’ in poor transmission quality! 1/4" TS phone plug (mono, unbalanced) Signal Ground, shielding Mighty-5TH...
Cleaning Cleaning Device components Clean the device components that are accessible from the outside regularly. The cleaning fre- quency depends on the operating environment: damp, smoky or particularly dirty environ- ments can cause greater accumulation of dirt on the device components. Clean with a dry soft cloth.
Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. Mighty-5TH...