Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de. TableAmp V2 BlueTooth Guitar Combo...
Personal consultation For personal consultation please contact our technical hotline. If you have any problems with the device the customer service will Service gladly assist you. 1.2 Notational conventions This manual uses the following notational conventions: TableAmp V2 BlueTooth Guitar Combo...
NOTICE! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided. TableAmp V2 BlueTooth Guitar Combo...
Page 8
General information Warning signs Type of danger Warning – high-voltage. Warning – danger zone. TableAmp V2 BlueTooth Guitar Combo...
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. TableAmp V2 BlueTooth Guitar Combo...
Page 10
Unplug the external power supply before electrical storms occur and when the device is unused for long periods of time to reduce the risk of electric shock or fire. TableAmp V2 BlueTooth Guitar Combo...
Page 11
The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if neces‐ sary, i.e. felt pads or similar. TableAmp V2 BlueTooth Guitar Combo...
AUX input, designed as 3.5 mm phone socket – Headphones output, designed as 3.5 mm phone socket Guitar / Microphone, Bass, Treble, Reverb and Master Volume controls Standby function Ideal for singing and playing along TableAmp V2 BlueTooth Guitar Combo...
Take care when running the cables to prevent tripping hazards. NOTICE! Possible property damage by magnetic fields Loudspeakers produce a static magnetic field. Therefore, maintain an appropriate distance to devices that can be adversely affected or damaged by an external magnetic field. TableAmp V2 BlueTooth Guitar Combo...
Connections and controls Connections and controls Top side ö & TableAmp V2 BlueTooth Guitar Combo...
Page 15
If you connect an audio source to the AUX input with an existing Bluetooth connection, the Bluetooth connection will be interrupted. As soon as you disconnect the jack plug from the AUX input, the Bluetooth connection is automatically restored. TableAmp V2 BlueTooth Guitar Combo...
Page 16
The power-saving Auto Power OFF function shuts off the device after about 20 minutes without input signal and the Blue‐ tooth button stops lighting. Press the Bluetooth button or turn the main power switch off and on again to turn the power back on. TableAmp V2 BlueTooth Guitar Combo...
Version 5.0 Power supply External power adapter, 100 - 240 V 50/60 Hz Operating voltage 15 V / 2.4 A, centre positive Dimensions (W × H × D) 320 mm × 200 mm × 160 mm TableAmp V2 BlueTooth Guitar Combo...
Page 18
Temperature range 0 °C…40 °C Relative humidity 20 %…80 % (non-condensing) Further information Reverb External effects loop Effects processor Recording output MIDI port IR remote control External speaker connector Foot switch connector Line Out Channels Cover TableAmp V2 BlueTooth Guitar Combo...
180°. Since the interference affects both cores equally, by subtracting the phase-shifted signals, the interfering signal is completely neutralized. The result is a pure signal without any noise inter‐ ference. TableAmp V2 BlueTooth Guitar Combo...
Page 20
1/4" TS phone plug (mono, unbalanced) Signal Ground, shielding 1/4" TRS phone plug (mono, bal‐ anced) Signal (in phase, +) Signal (out of phase, –) Ground Three-pole 1/8" mini phone jack (stereo, unbalanced) Signal (left) Signal (right) Ground, shielding TableAmp V2 BlueTooth Guitar Combo...
Page 21
Plug and connection assignment XLR plug (balanced) Ground, shielding Signal (in phase, +) Signal (out of phase, –) Shielding on plug housing (option) TableAmp V2 BlueTooth Guitar Combo...
Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. TableAmp V2 BlueTooth Guitar Combo...