Checking Or Changing Programmed Tracks; Searching For And Storing The Radio Stations - Samsung MAX-ZB630 Instruction Manual

Checking or Changing Programmed
Tracks
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press Program.
Result: The following indications are displayed:
(CH = Check, 01=Program No, DI = Disc No, – – = Track No on the disc)
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press Program.
3
Press Program again.
Result: The first track selected is displayed, together with the letter CH (Change).
4
Press Program one or more times until the track to be changed is displayed.
5
If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
6
Press and or turn Multi Jog to select a different track.
7
Press Program to confirm your change.
8
Press CD ( ) to start listening to the selection.
Result: The first track selected is played.
8
6
1
2,3,4,7
6
14
5
6
2,3,4,7
6
1
8
6
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
15 AM stations (or 8 MW and 7 LW stations) or
15 AM stations 5 MW ,5 SW1,and 5 SW2 Stations)
(
1
Switch the system on by pressing Standby/On.
2
Select the TUNER function by pressing TUNER.
3
Select the required frequency band by pressing TUNER (Band)
again on the front panel or TUNER (Band) on the remote control.
Result: The appropriate indication is displayed:
FM
AM(MW)
SW1,2(Option)
LW(Option)
4
To search for a
station...
Manually
Automatically
5
Select the station to be stored by:
Turning the Multi Jog knob to the right or to the left to increase or
decrease the frequency respectively
or
Pressing Tuning or
To scroll through the frequencies faster when searching
manually, hold down the Tuning Mode Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
6
Adjust the volume by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
7
Select the stereo or mono mode by pressing Mono/ST.
2,3
1
7
5
Frequency Modulation
Medium Wave
Short Wave
Long Wave
Press Tuning Mode on the front panel
or on the remote control
One or more times until MANUAL is
displayed.
One or more times until AUTO is
displayed.
on the remote control
6
5
5
4
4
5
GB