Function To Skip Through 10 Tracks At A Time; Last Memory Function; Repeating One Or All Tracks On The Compact Discs; Programming The Order Of Playback - Samsung MAX-ZB630 Instruction Manual

Function to skip through 10
tracks at a time
Press the +10 button briefly while playing back a
CD. The track 10 tracks after the current one will then
be played back.
Example: If you want to select track 43 during playback of track
15, press the +10 button three times, and then press
the button three times.
15 20 30 40
+10 +10 +10

Last Memory Function

*This function is only available during playback of an MP3-CD.
When MP3-CD playback is selected again after your CD player has
been stopped or turned off, this function allows playback from the
start of the track that you last listened to.
Press the Program button on the main set or Program/Set button
on the remote control while your MP3-CD is being played back.
The LAST ON and OFF may be repeatedly selected.
Repeating One or All Tracks on the
Compact Discs
You can repeat indefinitely:
A specific track on a compact disc.
All tracks on the compact disc selected.
All discs loaded in the carrousel
1
To repeat...
The current track indefinitely
The selected disc
All discs loaded
2
When you wish to stop the Repeat function, press CD Repeat until ALL
CD or 1 CD is displayed, or press

Programming the Order of Playback

You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
You can program up to 24 tracks.
You must stop the compact disc player before selecting the tracks.
This feature can be combined with the Repeat function.
41 42 43
CD CD CD
Press CD Repeat on the Front
Panel one or more times until...
REPEAT 1 is displayed
REPEAT 1 CD is displayed
REPEAT ALL CD is displayed
.
1
If the CD function is selected, stop the player by pressing
2
Load the selected CDs.
3
Press Program.
Result: The following indications are displayed:
(01 = Program no., DI = Disc no., – – = Track no. on the disc)
4
If necessary, select the disc containing the required track by press-
ing the corresponding Disc (1, 2, 3) button.
5
Select the required track by turning the Multi Jog knob:
To the left to move back through the tracks
To the right to move forward through the tracks
6
Press Program to confirm your selection.
Result: The selection is stored and
7
To select other tracks, repeat Steps 4 to 6.
8
Press CD ( ) to listen to the track selection in the order
programmed.
9
To...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards one
or more tracks
10
To cancel the selection, press
Once if the compact disc player is stopped
Result: PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to
the next programmed track.
You can also use the
tracks in step 5, 9.
You can also use Program/Set button on the remote control
to instead Program button in step 3,6.
8
5,9
.
is displayed.
Turn the Multi Jog knob...
One notch to the left
Two notches to the left
One notch to the right
The appropriate number of
notches to the right or to the
left
.
/ buttons to select the required
4
3,6
1,10
GB
13