Table of Contents
Advertisement
Timer Function
GB
The timer enables you to switch the system on or off at
specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing Standby/On.
2
Press Timer/Clock until
3
Press Enter.
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
4
Set the timer switch-on time.
a
Set the hour by tuning the Multi Jog knob to the right or to the left.
b
Press Enter.
Result: The minutes flash.
c
Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d
Press Enter.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
5
Set the timer switch-off time.
a
Set the hour by tuning the Multi Jog knob to the right or to the left.
b
Press Enter.
Result: The minutes flash.
c
Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d
Press Enter.
Result: VOL XX is displayed, where XX corresponds to the
volume already set.
6
Press Tuning Mode Down and Up to adjust the volume level and
press Enter.
Result: The source to be selected is displayed.
7
Turn the Multi Jog knob to select the source to be played when the
system switches on.
If you select...
TAPE (cassette)
TUNER (radio)
CD (compact disc)
8
Press Enter to confirm the timer.
9
Press Standby/On to set the system to standby mode.
Result:
is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
If the timer switch on and off times are identical, the word ERROR is
displayed.
18
TIMER is displayed.
You must also...
Insert a recorded cassette in one of
the decks before setting the
system to standby.
a Press Enter.
b Select a preset station by tuning
the Multi Jog knob to the right or
to the left.
a Load one or more compact discs.
b Select the required disc.
2
1,9
To set the timer function
You may use Multi Jog or
5, 6, 7.
You can also use Program/Set button on the remote control to
instead Enter button in step 3, 4, 5, 6, 7, 8.
Setting the System to Switch off
Automatically
While listening to a compact disc or a cassette, you can
set the system to switch off automatically
Example: You wish to go to sleep to music.
1
Press AI Sleep.
Result: playback starts and the following indications are displayed:
90 MIN
2
Press AI Sleep one or more times to indicate how long the
system should continue playing before it switches off:
At any time, you can:
Check the remaining time by pressing AI Sleep
Change the remaining time by repeating Steps 1 and 2
3
Press AI Sleep one or more times until AI SLEEP is displayed.
Result: The system will automatically switch off at the end of the
disc or cassette.
4
To cancel SLEEP or AI OFF function, press AI Sleep one or more
times until OFF is display.
4,5,7
6
6
3,4,5,6,7,8
/
buttons to adjust in step 4,
Hide quick links:
Advertisement
Table of Contents
