using the menu items
SETTING MENU ITEMS
You can setup the date/time, OSD language, video output, and display settings of the HD camcorder.
Date/Time Set
Set the current date and time so they can be recorded correctly. page 25
Date/Time
You can set to set the date and time to display on the LCD screen.
• Before you use the "Date/Time" function, you must set the date and time. page 25
Settings
Off
Current date and time information is not displayed.
Date
Displays the current date.
Time
Displays the current time.
Date & Time
Displays the current date and time.
• The date/time will read "JAN/01/2007 12:00 AM" in the following conditions.
- If the a movie or photo recording was made before setting the date/time in the HD camcorder.
- When the built-in rechargeable battery becomes weak or dead.
• The time and date which movie or photo images are recorded are displayed in play mode.
File No.
File numbers are assigned to images in the order they were recorded.
Settings
Assigns file numbers in sequence even if the memory card is replaced with another
Series
one or after formatting or deleting all files.
The file number is reset when a new folder is created.
Resets the file number to 0001 even after formatting or deleting all files or inserting
a new memory card. Use "Reset" when the folder and files cannot be created
Reset
anymore because the camcorder has reached its limit.
66_ English
Contents
Contents
On-screen display
None
JAN/01/2007
12:00 AM
JAN/01/2007 12:00AM
On-screen
display
None
None