Inserting/Ejecting A Memory Card - Samsung SC-HMX10 User Manual

INSERTING/EJECTING A MEMORY CARD

Inserting a memory card
1. Slide and open the memory card cover.
2. Insert the memory card into the slot until it softly clicks.
• Make sure that the terminal portion is facing up and the camcorder is
placed as shown in the figure.
3. Slide and close the memory card cover.
Ejecting a memory card
1. Slide and open the memory card cover.
2. Slightly push the memory card inwards to pop it out.
3. Pull the memory card out of the slot and slide and close the memory card
cover.
The HD camcorder supports SDHC and MMCplus memory cards for data storage.
The data storage speed may differ, according to the manufacturer and production system.
• SLC (single level cell) system: faster write speed enabled.
• MLC (multi level cell) system: only lower write speed supported.
For best results, we recommend using a memory card that supports faster write speed.
Using a lower write speed memory card for recording a movie may cause difficulties with storing the movie on the
memory card. You may even lose your movie data during the recording.
In an attempt to preserve any bit of the recorded movie, the HD camcorder forcibly stores the movie on the
memory card and displays a warning: "Low Speed Card. Please record a Lower quality"
If you are unavoidably using a low speed memory card, lower the recording quality by one level "[HD] Fine," "[HD]
Normal."
You have five quality options to record a movie with the HD camcorder : "[HD] Super Fine," "[HD]Fine," "[HD]
Normal," "[SD] Standard," and "[SD] Economy."
However, the higher the quality, the more memory that will be used.
Actual formatted capacity may be less as the internal firmware uses a portion of the memory.
English _27