Samsung SC-HMX10 User Manual page 112

troubleshooting
USB
Message
Fail Printer Connecting
Fail USB Connecting
Ink Error
Paper Error
File Error
Printer Error
Print Error
When there is dew condensation, put the camcorder aside for a while before using
• What is dew condensation?
CAUTION Dew condensation happens when a HD camcorder is moved to a place where there is a significant temperature difference from
the previous place. The Dew condenses on the external or internal lenses of the HD camcorder, and on the reflection lens. When
this happens, it may cause a malfunction or damage to the HD camcorder when using the device with the power on while there is
dew condensation.
• What can I do?
Turn the power off and detach the battery pack, and leave it in a dry area for 1~2 hours before using it.
• When does the dew condensation occur?
When the device is relocated to a place with a higher temperature than the previous location, or when using it in a hot area
suddenly, it will cause condensation.
- When recording outside in cold weather during the winter and then using it in indoors.
- When recording outside in hot weather after being indoors or inside a car where the A/C was running.
Note before sending your camcorder for repair.
• If these instructions do not solve your problem, contact 1-800- SAMSUNG for your nearest Samsung authorized service center.
• Depending on the problem, the built-in memory may need to be initialized or replaced and the data will be deleted.
Be sure to back up the data on your PC before sending your camcorder to repair.
Samsung cannot guarantee any loss of your data.
100_ English
Icon Informs that...
A problem occurred when connecting
-
the camcorder via USB to a printer.
A problem occurred when connecting
-
the camcorder via USB to a PC.
There is a problem with the ink
-
cartridge.
- There is a problem with the paper.
- There is a problem with the file.
- There is a problem with the printer.
- A problem occurred during printing.
Action
• Check the USB cable.
• Try the connecting procedure again.
• Switch "USB connect" function to "Mass Storage."
• Check the USB cable.
• Try the connecting procedure again.
• Switch "USB connect" function to "PicBridge."
• Check the ink cartridge.
• Put a new ink cartridge in the printer.
• Check the paper in the printer. If there is no paper,
inset the paper.
• Your HD camcorder does not support this file format.
• Try another file recorded on your HD camcorder.
• Turn the printer's power off and on.
• Contact the printer manufacturer's service center.
• Do not remove power source or eject memory card
during printing.