VEVOR RECHDB1 Manual

TOUGH TOOLS, HALF PRICE
Dust Barrier System
Model:RECHDB1/RECHDB2
(The picture is for reference only, please refer to the actual object)
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating.
VEVOR reserves clear interpretation of our user manual. The appearance of the product shall
be subject to the product you received. Please forgive us that we won't inform you again if
there is any technology or software updates on our product.
01
Safety Notice
WARNING:
1.Read this material before using this product.
2. Flammable: Keep away from open flame. This
product will ignite and burn if brought into contact with
an open flame.
3. Keep away from sharp points,blades and other
items,so as not to scratch the product.
4. This product is not a toy, Dust barrier system cannot
be used as toys for children to play with.
5. Test the tape on a discrete surface before using. Use
on clean, dry surface. Don't intended to use with
lacqurers, wall paper, unpainted wallboard, surface with
dust.
Assembly precautions
1.Assemble only according to these instructions.
2. Wear ANSI-approved safety goggles and heavy-duty
work gloves during assembly.
3.Keep assembly area clean and well lit.
4.Keep bystanders out of the area during assembly.
SAVE THESE INSTRUCTIONS
The package doesn't include the magnetic
zipper.The installation of magnetic zipper in
the manual is for display only.
Please purchase by yourself if you need.
Assembly Instruction
1. Unlock the extension poles and measure the maxi-
mum extension length. Make the extension poles about
3-5cm longer than the ceiling height and lock the poles.
Making the extension poles a little bit higher than the
ceiling will secure the poles tightly standing upright
between the floor and ceiling.
2. Use a double sided tape to stick the film before
installing the extension pole.
02
3. Lift the film with extension poles and install the
extension pole on the appropriate position you need,
fasten and lock it. Lock by twist ingthe thinner pole
according to below instruction.
4. Find the right place you want to make a door and
stick the adhesive zipper on the appropriate place of
the film sheeting.
① Find the right place you want to stick the zipper.
② Peel off the release paper and stick the zipper on
the film.
③ Press the film with the zipper to make sure they stick
together firmly.
④ Cut off the film in the middle of the zipper.
03