Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support STATIC CLIMBING ROPE USER MANUAL MODEL NO.: ROPE-S-105-32、 ROPE-S-105-64、ROPE-S-105-96 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
Taking care of all of these aspects helps avoid premature wear of the equipment. Here is a summary of precautions recommended by VEVOR for maintaining your equipment. 3.1) Precautions for use A rope swells with use and can shrink in length by up to 15 %.
Page 4
mark the ends with the correct lengths and end markings. Cutting a rope makes you responsible for measuring the new lengths and adding new markings. It is recommended to follow the UIAA protocol for cutting and measuring your rope and to add a margin of 3% to address shrinkage over the life of the rope.
Page 5
lukewarm soapy water (ph neutral, 30 °C maximum), then rinse thoroughly with fresh tap water.You can wash your rope in a washing machine. Choose the 30 °C delicate synthetic setting, without spin cycle.Use only household face and body soap. All other cleaning products, for example solvents, stain removers, degreasers, etc.
TECHNICAL SPECIFICATIONS Model ROPE-S-105-32 ROPE-S-105-64 ROPE-S-105-96 Main Material Dacron Dacron Dacron Color Blue Blue Blue Net Weight (kg) 1.16 1.97 2.83 line supervisor(ft) PACKAGE CONTENTS PERIODIC CHECKING OFPERSONAL PROTECTIVE EQUIPMENT...
Page 7
Description PERIODIC CHECKING OF PERSONAL PROTECTIVE EQUIPMENT GENERAL REMARKS Carrying out regular periodic checks (at intervals predetermined by the manufacturer) is vital for ensuring the equipment's efficiency and durability and the user's safety. The performance of regular periodic inspections is required by the ASTM F2116 –...
Page 8
The device is in good condition or has only minor damages: it is therefore suitable for use. The device has medium/major damages that affect its primary functions and, as a consequence, must be discarded. The device has defects that can be solved through lubrication or cleaning.
Page 9
To check the length of your rope, follow the steps below:1. Completely uncoil the rope.2. Check the middle mark of the rope. There is a simple way to find the middle of the rope: hold the two rope ends together, then slide the two strands simultaneously through your hands until the middle of the rope is reached.
Need help?
Do you have a question about the ROPE-S-105-32 and is the answer not in the manual?
Questions and answers