Important Safety Precautions When using your Vivitar Wireless Bluetooth Speaker, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER. 2. Do not use your speaker near water. Clean using a soft cloth or paper towel.
Introduction Thank you for purchasing your Vivitar Wireless Bluetooth Speaker. You can use your speaker with most smartphones and Bluetooth devices to stream music. In order to get the best results, please read this manual first before using your speaker.
Page 4
A Quick Look at Your Device Buttons and Ports Power/Mode Volume +/Next Track Volume -/Previous Track Charging Play/Pause/Light TF Memory USB Port AUX Port Port Card Slot...
Charging Your Speaker USB-C Plug Plug 1. The included USB charging cable 2. .Insert the USB-c end of the 3. Insert the USB charging cable’s has a USB-C plug and a standard included charging cable into the standard USB plug into the USB USB plug.
Page 6
2. Go to the Bluetooth settings menu on your phone. 3-4 seconds to power ON or power OFF your speaker. Make sure that Bluetooth is turned on. Once your speaker is powered ON it will go into Connect to the device listed as “V60097BT”. Bluetooth Pairing Mode.
Using Your Speaker press & hold press & hold press press press Press the play/pause button to Press the + button to skip to the next Press the - button to go back to the play or pause a track. track in a playlist.
Page 8
TWS Pairing If you have two of the same V60097BT speakers, you can pair them together to play music in sync. When both speakers are on Bluetooth mode with one speaker connected to a smartphone, double press the Power/Mode button on one speaker.
Maintenance and Care -Before using your speaker, inspect the ports to make sure that they are clear of dust and debris before charging. -Use a soft cloth to clean your speaker. Never use any harsh chemicals or detergents. Make sure your speaker is dry before charging.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 11
To Obtain Warranty Service and Troubleshooting Information: Call 1-800-592-9541 or visit our website at www.vivitar.com. To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures.
Need help?
Do you have a question about the V60097BT and is the answer not in the manual?
Questions and answers