Vivitar VZ60023BT User Manual

Vivitar® VZ60023BT Bluetooth® Speaker
User Guide
Thank you for purchasing the Vivitar® VZ60023BT Bluetooth® Speaker.
Introduction
With this speaker, you will enjoy listening to high quality music wirelessly using Bluetooth®
technology. Easily connect to any mobile device for both conversation and music listening. It
also pairs with other Bluetooth-enabled devices (Bluetooth V3.0+EDR specification and HSP,
HFP, A2DP and AVRCP profiles).
Specifications
• Bluetooth Specification: V3.0+EDR
• Operation Frequency: 2.402-2.48GHz
• Supported Profile: HSP, HFP, A2DP, AVRCP
• Operation Range: Up to 33 feet(10 meters)
• Rated Input: 5V 500mA
• Battery Type: 1000mAh, 3.7V, Polymer Lithium Ion Battery
I
n the Box
• VZ60023BT Bluetooth® Speaker
• USB Charging Cable
• User Manual
Safety Precautions
• Please read this User Manual carefully and follow all instructions.
• To avoid damage or malfunction of the speaker do not drop it from high locations and/or on
to hard surfaces, do not place heavy objects on it.
• Keep speaker away from humidity, water and other liquids. If it does get wet, do not operate
as this may cause an electrical shock, explosion and damage to the device or to the user.
• Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves
or any other apparatus that produces heat. This may cause an explosion, degrade the
performance and/or reduce battery life.
• Do not modify, repair or disassemble device (especially the battery). Doing so will void the
warranty. The battery in this device may present a risk of fire or chemical burns if misused or
tampered with.
• Use only supplied and manufacturer-approved chargers and unplug this device when not in
use for long periods of time or during lightning storms.
FCC Statement
This device complies with part 15 of the FCC rules, operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV
interference, caused by unauthorized modifications to this equipment. Such
modifications could void the user's authority to operate the equipment.
Location of Controls
Front
① Microphone
② Indicator LED
③ Previous Track / Volume –
④ Power / Play / Pause / Answer
⑤ Next Track / Volume +
⑥ Charging Port
First Time Use
Charging the Battery
The VZ60023BT Speaker has a built-in, rechargeable lithium-polymer battery. To avoid damage,
do not attempt to remove the battery. The full performance of the battery is achieved after two
or three charging-discharging cycles. Charge the battery fully before first use.
1. Connect the USB cable to the speaker.
2. Connect to the correct outlet (wall, computer, car charger).
3. When the charger is connected to the speaker, the red indicator light will turn on.
Note: Charging the battery fully may take up to 2 hours.
4. When the battery is fully charged, the red indicator light will turn off. Disconnect the charger
from the speaker and the outlet. The speaker is ready for use.
Note: Overcharging could reduce the life of the battery. A charged battery will lose its capacity
if it is not used on a regular basis.
Important!
Ensure that the battery is fully charged if the speaker is not used for a long period of time. To
avoid a complete discharge of the battery, charge the speaker at least every six(6) months.
Battery Notes
• A fully charged battery provides up to six(6) hours of talk-time, four(4) hours music playback,
and up to ten(10) hours of standby time. Talk and standby times vary depending on mobile
phones or other compatible Bluetooth® devices, settings, styles, etc.
• When the battery power is low, the speaker will beep every 30 seconds.
• When using with your iPhone, an additional battery meter feature will display the remaining
battery on your phone's touch screen.
Back
① ② ③ ④ ⑤ ⑥