Important Safety Precautions When using your Vivitar Light-Up Acrylic Bluetooth Speaker, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER. 2. Do not use your speaker near water. Clean using a soft cloth or paper towel.
Introduction Thank you for purchasing your Vivitar Light-Up Acrylic Bluetooth Speaker, item VC60014BT. You can use your speaker with iPads, iPhones, iPods and many other types of smartphones and Bluetooth devices to stream music. While listening to music, you can enjoy the soothing lights emitted by your speaker.
Page 4
A Quick Look at Your Device 1. Charging Port A. ON/OFF Switch 2. Auxiliary Port B. Mode Button 3. Hanging Hook C. Previous Track/Volume Down 4. TF Card Reader* D. Next Track/Volume Up E. Play/Pause/Answer *The TF Card Reader can read TF or Micro SD memory cards up to 32GB in size.
Charging Your Speaker Your speaker has a built-in, rechargeable lithium ion battery. To avoid damage, do not attempt to remove the battery. The full performance of the battery is only achieved after a few charging-dis- charging cycles. Charge the battery fully before first use. To do so, follow the steps below: 1.
Page 6
This indicates that your speaker is in pairing mode. 2. Go to the Bluetooth Manager of your Bluetooth device. 3. Search Bluetooth devices and select your speaker (most frequently listed as “VIVITAR SPEAKER”) to start connecting.
Using Your Speaker Powering Your Speaker On and OFF 1. Slide the On/Off Switch to the ON position in order to power on your speaker. If you have already paired your speaker to your Bluetooth device, they will automatically remain paired each time you power on your speaker.
Maintenance and Care -Before using your speaker, inspect the ports to make sure that they are clear of dust and debris before charging or inserting an AUX cable. -Use a soft cloth to clean your speaker. Never use any harsh chemicals or detergents. Make sure your speaker is dry before using.
FCC Statement This device complies with the part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: changes or modifications not expressly approved by the party responsible for compli- ance could void the user's authority to operate the equipment.
Page 10
Vivitar One Year Warranty This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
Page 11
Vivitar One Year Warranty (continued) NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR.