Vivitar VU60014BT User Manual

Vivitar® VU60014BT Bluetooth® Speaker
User Manual
Thank you for purchasing the Vivitar® VU60014BT Bluetooth® Speaker.
Introduction
With this speaker, you will enjoy listening to high quality music wirelessly using Bluetooth®
technology. Easily connect to any mobile device for music listening. It also can pair with other
Bluetooth-enabled devices.
Specifications
• Bluetooth Specificaton: V3.0
• Operation Frequency: 2.402-2.48GHz
• Supported Profile: HSP, HFP, A2DP, AVRCP
• Operation Range: Up to 33 feet(10 meters)
• Talk Time: About 4 hours
• Play Time: About 4 hours
• Standby Time: About 20 hours
• Battery Type: 400mAh, 3.7V, Polymer Lithium Ion Battery
• Charge Time: About 2 Hours
In the Box
• VU60014BT Bluetooth® Speaker
• USB Charging Cable
• User Manual
Safety Precautions
• Please read this User Manual carefully and follow all instructions.
• To avoid damage or malfunction of the speaker do not drop it from high locations and/or on to
hard surfaces, do not place heavy objects on it.
• Keep speaker away from humidity, water and other liquids. If it does get wet, do not operate as this
may cause an electrical shock, explosion and damage to the device or to the user.
• Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves or
any other apparatus that produces heat. This may cause an explosion, degrade the performance
and/or reduce battery life.
• Do not modify, repair or disassemble device (especially the battery). Doing so will void the warranty.
The battery in this device may present a risk of fire or chemical burns if misused or tampered with.
• Use only supplied and manufacturer-approved chargers and unplug this device when not in use for
long periods of time or during lightning storms.
FCC Statement
This device complies with the part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates. Uses and can
radiate radio frequency energy and, if not installed and used in accordance with instructions
may cause harmful interference to radio or -television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
__ Reorient or relocate the receiving antenna.
__ Increase the separation between the equipment and receiver.
__ Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
__ Consult the dealer or experienced radio/ TV technician for help.
EC Declaration of Conformity
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference,
caused by unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment. This product is CE certified according to the
provision of the R&TTE Directive (99/5/EC). This declares that this product is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC. Please
note that this product uses radio frequency bands not harmonized within EU. Within the EU
this product is intended for use in Austria, Belgium, Denmark, Finland, France, Germany,
Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and United
Kingdom and within EFTA in Iceland, Norway and Switzerland.
Location of Controls
① Power / Play / Pause
Answer/Indicator LED
② LED button
③ Charging Port
④ Microphone
⑤ Auxiliary Port
① ②
First Time Use
Charging the Battery
The VU60014BT Speaker has a built-in, rechargeable lithium-polymer battery. To avoid damage, do
not attempt to remove the battery. The full performance of the
battery is achieved after two or three
charging-discharging cycles. Charge the
battery fully before first use.
1. Connect the USB cable to the speaker.
2. Connect to the correct outlet (wall,
computer, car charger).
3. When the charger is connected to the
speaker, the red indicator light will turn on.
Note: Charging the battery fully may take up to 2 hours.
4. When the battery is fully charged, the red indicator light will
turn off. Disconnect the charger from the speaker and the outlet. The speaker is ready for use.
③ ④ ⑤