Aiwa CX-ZL10 Operating Instructions Manual page 12

To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
To change the programmed tracks
Up to 30 tracks can be programmed from any of the inserted
Clear the program and repeat all the steps again.
discs.
2
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REPEAT
3
repeatedly while pressing SHIFT until ~ appears on the display.
1
5
m
"
During programmed play, you can not use random play, check
44, E
the remaining time or select a track.
" "FULL'> is displayed if you attempt to program more than 30
tracks.
U .;
. . . . . ,.
Use the remote control,
1
2
3
Press PRGM while pressing SHIFT in stop mode.
"PRGM" is displayed
Press one of DISC DIRECT PLAY 1-3 to select a
disc.
Go to the next step when the tray stops rotating.
Press numbered buttons O-9 and +1 Oto program
a track.
Example:
To select the 25th track, press +1O, +1O and 5
To select the 10th track, press +1O and O.
Program number
Selected track number
Total playing time of
the selected tracks
Total number of selected tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press > to start play.
To check the program
Each time < or > is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press CLEAR in stop mode.
12
ENGLISH