Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Viqua RO-4S
Summary of Contents for Viqua RO-4S
- Page 1 Owner’s Manual Model: RO-4S 425 Clair Rd. W, Guelph, Ontario, Canada N1L 1R1 t. (+1) 519.763.1032 • tf. 1.800.265.7246 (US and Canada only) t. +31 73 747 0144 (Europe only) • f. (+1) 519.763.5069 e-mail: info@viqua.com www.viqua.com 520193-R_RevG...
-
Page 2: Section 1 Safety Information
Safety Information Section 1 Safety Information Please read this entire manual before operating this equipment. Pay attention to all danger, warning, and caution statements in this manual. Failure to do so could result in serious personal injury or damage to the equipment. Make sure that the protection provided by this equipment is not impaired. -
Page 3: General Information
Section 2 General Information The VIQUA reverse osmosis drinking water system has been designed for quick and simple installation and maintenance. By carefully reading this instruction manual and following the operational guidelines you will insure a successful installation and reliable operation. Routine maintenance is essential to the longevity and performance of the system. Filters should be changed every six to twelve months depending on the quality of the feed water supply. -
Page 4: Starting Your Installation
Installation Item Components Part Number Item Components Part Number Supply Feed 411023-R, 411024-R 1/4” union tee CI0208W Filter Housing 158125 2.5 Clips PPC212W Filter Housing 'O-Ring 143026 Membrane Housing EH2501W 5 Micron PreFilter AWP110 In-Line GAC F-ICE10 Carbon Block C-01 Double Clip PPC205W 3/8”... - Page 5 Installation 3.1.2 Preparation Check the following list of components to ensure that all parts are packed with your system. Components Quantity Storage Tank RO System Faucet Installation Kit Procedure: 1. Determine the location: a. For the installation of the RO system - Avoid locations where the system might come in contact with hot water pipes or other hazards.
- Page 6 Installation • To remove a tube, push in the collet and pull out the tube. Figure 5 Tube Installation 3.2 Source and Drain Water Saddle Valve 3.2.1 Shut Off the Water Locate the water shut-off valve for the cold water feed line you choose to use for the supply. Accidentally hooking up the system to the hot supply line will permanently damage the membrane (See Conditions for operation).
- Page 7 Installation Supply Feed (Insert) Flex Line Solid Copper Line Figure 6 Supply Feed Installation 3.2.3 Installing the Drain Clamp Select a location for the drain hole based on the design of the plumbing. Position the drain outlet saddle on the drain pipe. Allow adequate space for drilling.
- Page 8 Installation 3.3.2 Porcelain/Enamel Sinks • A 3/8” variable speed drill is recommended for this procedure. • A spring loaded Relton style drill set is strongly recommended to prevent chipping. • The plastic sleeve supplied on the pilot drill is to be positioned on the drill bit against the drill chuck. This prevents the chuck from contacting the porcelain after the pilot hole has been completed.
- Page 9 Activation To connect an additional point of use (Icemaker, extra faucet, etc.), place a ‘T’ connector in the 1/4” line between the faucet and the RO system. Drilling with the recommended Relton cutter. Figure 8 Drilling Procedure Step Description The Pilot Drill is used to drill a hole completely through to provide a guide for both the Porcelain Saw and Finish Hole Saw. The Porcelain Saw is used to cut trough the porcelain surface only.
-
Page 10: Maintenance
Maintenance Section 5 Maintenance Notes: 1) Imperative to follow the sequence as outlined. 2) Filters are labeled for easy servicing. • Open the RO faucet and let the tank drain completely. Leave the faucet open until the filter change is complete. •... -
Page 11: Specification
The VIQUA reverse osmosis system is warranted to be free from defects in materials and workmanship under normal use within the operating parameters listed below. For a period of twelve months from the date of purchase, VIQUA will repair or replace any part of the reverse osmosis system with the exception of the filters. - Page 12 (+1) 519.763.1032 • tf. (+1) 800.265.7246 (solo EE. UU. y Canadá) t. (+31) 73 747 0144 (Europe seulement) • f. (+1) 519.763.5069 t. (+31) 73 747 0144 (solo Europa) • f. (+1) 519.763.5069 Courriel : info@viqua.com correo electrónico: info@viqua.com www.viqua.com...
Need help?
Do you have a question about the RO-4S and is the answer not in the manual?
Questions and answers