EXPLORE HOME UNIVERSAL GRIFFITH PARK U400818L Assembly And Installation Instruction

G R I F F I T H P A R K B U N C H I N G T A B L E L A R G E
A S S E M B L Y & I N S T A L L A T I O N I N S T R U C T I O N
S T E P 1 :
Open the TABLETOP (B) carefully and place it in its
final location keeping the bottom part sky facing, make
sure the surface is neat to avoid scratches on the top
part. Use carpet or soft cloth before laying down the
top for assembly.
S T E P 2 :
Unpack all legs. There are pre-drilled holes and stickers
(A/B/C) pasted at the bottom side of the top. The same
stickers (A/B/C) are pasted on legs as well. Put leg on
the top as per the (IMAGE-2) using the location of pre-
drilled holes and matching the stickers. Lock it using saw
threaded screws (M4x16) , attached in the hardware kit.
Ensure all screws are completely tightened by
screwdriver machine.
Repeat the same process for all three legs as per the
(IMAGE-2).
S T E P 3 :
Before moving the table in the correct
position check all the hardware fitting, and
slowly flip the table in air. For moving the
product 2 persons are recommended. Your
table is ready to use.
CARE & MAI NTANCE INSTRUCTIONS
• Use a clean soft cotton cloth to wipe the surface. Do not use abrasive or chemicalcleaners.
• Wipe the surface immediately if any liquid product spills on the top.
• During normal use every day, screws, bolts, nuts, and wooden plugs may loosen up. They should
be periodically inspected and re-tightened to prevent damage to the furniture and (or) personal property or
cause injury. Always check to be sure all hardware on this list and the above-mentioned components is attached
to the furniture properly and kept always tightened.
U 4 0 0 8 1 8 L
I M A G E
I M A G E 2 - A S S E M B L Y
I M A G E 4 - M O V I N G
A I R , T O K E E P I N G
C O R R E C T P O S I T I O N
B
A
C
1 - U P S I D E D O W N T O P
O F L E G W I T H
T H E T O P I N
I T I N
T O P