Page 1
QM97X0 Switch Systems Dismantling Guide Home...
Page 2
Table of contents Table of contents QM9700/QM9790 Dismantling Instructions QM9700/QM9790 Dismantling Instructions Product Material and Disposal Product Material and Disposal Document Revision History Document Revision History QM97X0 Switch Systems Dismantling Guide Home...
Page 3
Note This document is preliminary and subject to change. This document is intended for use by end-of-life recyclers or treatment facilities. It provides instructions for the proper disassembly and disposal of the QM97X0 switch systems speci ed below. Disassembling the System from the Rack Before referring to the dismantling instructions of the speci c system family, remove the system from the rack: 1.
Page 4
Part Numbers QM97X0 Part Numbers System Legacy NVIDIA SKU Description Model 920-9B210- MQM9700 64-ports NDR, 32 OSFP ports, managed, power- 00FN-0M0 -NS2F to-connector (P2C) air ow (forward) QM9700 920-9B210- MQM9700 64-ports NDR, 32 OSFP ports, managed, 00RN-0M2 -NS2R connector-to-power (C2P) air ow (reverse)
QM9700/QM9790 Dismantling Instructions QM97X0 Systems Dismantling To dismantle the system, perform the following steps, while viewing the matching illustrations. To view the amounts of each component in your system, refer to the Component List below with the item number in the brackets. Once you are done dismantling all switch components, make sure you have all the below listed screws, nuts and Washers.
Page 6
(#7) under the designated latch, and remove *Jig PN -MTCJXXXX. For assembly instructions, please contact your NVIDIA representative. Disconnect the Power Harness Disconnect the Harness from the Fan Board between the Fan Board and the to the Main Board (#9) from both sides.
Step Step Unscrew all screws and washers (#a) securing the Front Panel (#10) to the System's Base Bottom, and Unscrew all screws attaching the Main Board remove it. (#11) to the System's Base (#d, e) and remove it. Remove all COMEX Patch Spacers Unscrew all screws (#d) attaching the Fan (#12), and take out the CFL-H Board (#14) to the System's Base.
Page 8
QM9700/QM9 Component Fan Modules Power Supply Units Top Cover Heatsink SSD Card Screw Holder MEM Module Coin Battery Power Harness between the Fan Board and the Power Extender 1 Harness from the Fan Board to the Main Board Front Panel Main Board COMEX Patch Spacers CFL-H COM Express Module...
Electrolytic capacitors (height and/or diameter greater than capacitors 25mm) may be present in the power supplies Asbestos and its Parts used in NVIDIA products do not contain asbestos or its compounds compounds. Refractory ceramic Parts used in NVIDIA products do not contain refractory ceramic bers bers.
Page 10
According to the WEEE Directive 2002/96/EC, all waste electrical and electronic equipment (EEE) should be collected separately and not disposed of with regular household waste. Dispose of this product and all of its parts in a responsible and environmentally friendly way. Selective Treatment Equipment For a list of materials and components of waste electrical and electronic equipment for selective treatment, please refer to Article 6(1) and Annex II of the EU WEEE Directive.
Document Revision History Date Revision Description October 2024 Fixed typos June 2023 Initial revision QM97X0 Switch Systems Dismantling Guide Home...
Page 12
NVIDIA accepts no liability related to any default, damage, costs, or problem which may be based on or attributable to: (i) the use of the NVIDIA product in any manner that is contrary to this document or (ii) customer product designs.
Page 13
Sale for the product. Trademarks NVIDIA and the NVIDIA logo are trademarks and/or registered trademarks of NVIDIA Corporation in the U.S. and other countries. Other company and product names may be trademarks of the respective companies with which they are associated.
Need help?
Do you have a question about the QM97 0 Series and is the answer not in the manual?
Questions and answers