Connecting External Components; Connecting The Fm And Am Antennas - Samsung HT-DS960 Instruction Manual

Samsung ht-ds960: instruction manual
Hide thumbs Also See for HT-DS960:
Table of Contents

Advertisement

Connecting External Components

Connecting an External Digital / Analog Component
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Analog signal components such as a VCR or TV.
Audio Cable
If the external analog
component has only one
Audio Out, connect either
left or right.
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
2
Connect Audio In on the DVD player to Audio Out on the external analog component.
Be sure to match connector colors.
3
Press AUX on the remote control to select 'DIGITAL IN / AUX1 / AUX 2'.
Each time the button is pressed, the selection changes as follows: DIGITAL IN
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD
21
Optical Cable
(not included)
DIGITAL OUT
AUX 1
AUX 2.
DIGITAL IN
AUX1
AUX2
FM
AM.

Connecting the FM and AM Antennas

If AM reception is poor, connect an out-
door AM antenna(not supplied).
FM Antenna (supplied)
FM antenna connection
1. Connect the FM antenna supplied to the
FM 75 COAXIAL terminal.
2. Slowly move the antenna wire around until
you find a location where reception is good,
then fasten it to a wall or other rigid surface.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
AM Loop Antenna
(supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
AM antenna connection
1. Connect the AM loop antenna supplied
to the AM and
terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM ter-
minal. (Keep the AM loop antenna con-
nected).
22

Advertisement

Table of Contents
loading

Table of Contents