Table of Contents
Advertisement
Disc Playback
1
Press OPEN/CLOSE button to
open the disc tray.
2
Load a discs.
•
Place a disc gently into the tray with the
disc's label facing up.
3
Press OPEN/CLOSE button
to close the disc tray.
DVD
VCD
CD
•
Playback starts automatically.
Note
•
Depending on the content of the disc, the initial screen may
appear different.
To stop playback,
press STOP during playback.
•
If pressed once, "PRESS PLAY" is displayed and the
stop position will be stored in memory. If PLAY/PAUSE
(
) button or ENTER button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
•
If pressed twice, "STOP" is displayed, and if
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
25
To temporarily pause playback,
press PLAY/PAUSE during playback.
•
To resume playback, press PLAY/PAUSE (
) but-
ton again.
Disc terminology
Groups and tracks (DVD-AUDIO)
•
DVD-audios is divided into several large sections called "groups" and smaller
sections called "tracks". Numbers are allotted to these sections.
These numbers are called "group numbers" and "track numbers".
GROUP 1
TRACK 1
TRACK 2
TRACK 3
TRACK 1
Titles and chapters (DVD-VIDEO)
•
DVD-videos is divided into several large sections called "titles" and smaller sec-
tions called "chapters". Numbers are allotted to these sections.
These numbers are called "title numbers" and "chapter numbers".
TITLE 1
CHAPTER 1
CHAPTER 2
CHAPTER 3
CHAPTER 1
Tracks (Video and music CDs)
•
Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called "track numbers".
TRACK 1
TRACK 2
TRACK 3
TRACK 4
Note
•
In this manual, the instructions marked with "DVD (
to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
•
Depending on the content of the disc, the initial screen may appear different.
GROUP 2
TRACK 2
TITLE 2
CHAPTER 2
TRACK 5
DVD
)" are applicable
26
Advertisement
Table of Contents
