Samsung Moment User Manual page 164

2.
Tap the field to activate the feature
Wi-Fi
(checkmark indicates active). The device will scan
for available in-range wireless networks.
To turn Wi-Fi off:
1. Press
>
Wireless & networks > Wi-Fi
2.
Tap to remove the green checkmark and
deactivate Wi-Fi.
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery
and reduce your use times.
To connect to a Wi-Fi network:
1.
Press
>
Wireless & networks > Wi-Fi settings.
The network names and security settings (Open
network or Secured with WEP) of detected Wi-Fi
networks are displayed in the Wi-Fi networks
section.
Note:
When you select an open network, you will be
automatically connected to the network.
150 3B. Web and Data Services
and tap
>
.
and tap
>
2.
To manually add your new network connection:
Touch Add Wi-Fi network
Enter the Network SSID. This is the name of your
Wireless Access Point.
Tap the field and select a security option.
Security
This must match the current security setting on
your target WAP.
If secured, you will also need to enter your WAP's
password. The show password option
password as you type it vs only showing asterisks
(****).
Tap to store the new information and
Save
connect to your target WAP.
Note:
The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
.
, reveals the