Samsung Moment User Manual page 110

If a name has only a single number, or if you
know the name but are not sure which number to
call, say " " followed by the name only. For
Call
example, say "
Call John
recognized and there is only one phone number
for the name, your device immediately places the
call.
4.
When you hear "
type (for example, "
Note:
The device uses the term "location" to describe the
multiple number categories for a Contact such as
Mobile, Work, etc.
If there are multiple numbers stored for the
contact, the phone prompts you with "
and displays a list of options. You can
Number?"
select an option by saying it or by touching the
corresponding phone number onscreen.
Tip:
You can skip steps 3 and 4 by saying a name and
location after "Call" without pausing (for example, "
John Jones mobile
96 2F. Voice Services
." If the name is
Which location? ," say a number
").
Mobile
Which
").
Note:
If ASR does not recognize the name or number, it will
find the most likely matches and display a list of up to
three names or numbers. You will hear "Did you say..."
followed by the name or number. You can confirm by
saying or tapping "
selection.
Note:
If the phone does not hear a command within
approximately eight seconds, it deactivates Speech to
Action without taking any action.
Calling a Phone Number With ASR
1. Press and hold
2. When you hear "Say a command," say "
followed immediately by a valid string of digits to
be dialed, for example, say "
3.
If the correct number is repeated, say "
the number.
If the number is not recognized, the phone will
Call
play the message "
If the announced number is not correct, either say
" ," or "
No
announced, say or touch "
." Say or tap "
Yes
. You then hear a prompt.
Call 555 555 5555
Did you say call?
." When the correct number is
Cancel
" to dial the number.
Yes
" to change the
No
"
Call
."
Yes " to dial
"