Delta IN2ITION 58480 PK Series, IN2ITION 58480 25-PK Series, IN2ITION 58480-PK Manual

Installation

You may need:

1. Verify there is a gasket (1) in shower head (2). Hand tighten the shower head onto the existing shower arm (3) (shower arm and flange sold separately).
   
   Notice: Removal of or tampering with the flow restrictor may result in shower head failure and will void the warranty.
2. Place the hose gaskets (1) into the hose nuts on each end of the hose (2). Connect one end of the hose to the shower head and the other end to the hand shower. All connections should be able to be made by hand tightening.
   
3. To combine the two showers, insert the top slot (1) on the hand shower into the tab (2) of the shower head. Push the hand shower into the shower head until the two parts snap together.
   If the shower head moves when removing the hand shower, hand tighten the connection between the shower head and the shower arm.
   To change spray modes, press the botton (3) and move lever (4) to the desiredsetting. Turn knob (5) to change between shower head only, shower head and hand shower or hand shower only.
   

Cleaning and Care

Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.

www.deltafaucet.com
1-800-345-DELTA (3358)
customerservice@deltafaucet.com