Table of Contents
Advertisement
8. Press
to highlight the power off tab.
9. Press
to activate the Stop Power OFF screen, which will then display a
sliding bar scale of minutes that the RioVolt will remain on without activity
before automatically shutting off. By default this number is 1 minute.
10. Press
to move the slide right and increase the number of minutes before
the RioVolt powers off.
11. Press
to deactivate the Stop Power OFF screen and to enter your selection.
This completes the list of options in the Timer menu group.
Control
The fourth menu group tab is control. This menu group allows you to adjust:
•
whether you can scan through tracks (F.scan) and how fast (speed)
•
whether you can skip through tracks (F.skip)
•
how the Mode button on the remote control functions (mode)
•
whether the RioVolt automatically starts when the AC Adapter is used
(start)
•
whether autopause is used (pause)
1. Press
to highlight the control tab.
2. Press
to select the control tab and to highlight the F. scan tab below.
3. Press
to activate the FF/RW Scan screen, which will then display an
arrow next to the marked checkbox.
By default ON will be selected, allowing you to hold down the
FastForward or Rewind buttons on the Joypad to scan forward or
backward through a track.
4. Press
to move the arrow to the OFF checkbox if you want to turn off
the scanning feature.
5. Press
to mark the checkbox.
6. Press
to deactivate the FF/RW Scan screen and to enter your selection.
7. Press
to highlight the F. skip tab.
8. Press
to activate the FF/RW Skip screen, which will then display an
arrow next to the marked checkbox.
9. Press
or
to move the arrow to the checkbox option you prefer.
10. Press
to mark the checkbox you've selected.
11. Press
to deactivate the FF/RW Skip screen and to enter your
selection.
12. Press
to highlight the speed tab.
13. Press
to activate the FF/RW Scan Speed screen, which will then
display an arrow next to the marked checkbox.
This option allows you can adjust the speed at which your RioVolt scan
forward or backward through a track when you hold down the
button.
14. Press
to move the arrow to the checkbox option you prefer.
15. Press
to mark the checkbox you've selected.
16. Press
to deactivate the FF/RW Scan Speed screen and to enter your selection.
17. Press
to highlight the mode tab.
The Setup Menu
or
Return to Pg.1
Page 17
Advertisement
Table of Contents
Troubleshooting
