Table of Contents
Advertisement
160 seconds of skip free MP3/WMA music is always available regardless of the ESP setting.
22. Press
to activate the CD ESP screen, which will then display an arrow next to the marked checkbox.
23. Press
or
to move the arrow to the checkbox option you prefer.
24. Press
to mark the checkbox you've selected.
25. Press
to deactivate the CD ESP screen and to enter your selection.
This completes the list of options in the General menu group.
Display
The second menu group tab is display. This menu group allows you to make
changes to the way the display looks and performs by adjusting the Back
Light, Contrast, Tag Info and Time screens.
1. Press
to highlight the display tab.
2. Press
to select the display tab and to highlight the b.light tab below.
3. Press
to activate the Back Light screen, which will then display an
arrow next to the marked checkbox.
•
OFF turns the back light off all of the time.
•
Button ON turns the back light on only when a button has been
pushed.
•
Adapter & Button ON turns the back light on all the time when the
AC Adapter is in use or when a button is pushed.
4. Press
or
to move the arrow to the checkbox you wish to select.
5. Press
to mark the checkbox you've selected.
6. Press
to deactivate the Back Light screen and to enter your selection.
7. Press
to highlight the contrast tab.
8. Press
to activate the LCD Contrast screen, which will then display a
sliding bar scale that allows you to adjust the degree of contrast.
9. Press
to increase the contrast and move the slide to the right or
decrease the contrast and move the slide to the left.
10. Press
to deactivate the LCD Contrast screen and to enter your
selection.
11. Press
to highlight the next contrast tab.
This tab brings up the Remocon Contrast screen, which allows you to
adjust the contrast visible in the display of the RioVolt SP250's optional
remote control, available as an upgrade at www.riohome.com.
This screen works exactly like the LCD Contrast screen.
12. Press
to activate the Remocon Contrast screen, which will then
display a sliding bar scale that allows you to adjust the degree of contrast.
13. Press
to increase the contrast and move the slide to the right or
the slide to the left.
14. Press
to deactivate the Remocon Contrast screen and to enter your selection.
15. Press
to highlight the tag info tab.
16. Press
to activate the Tag Information screen, which will then display
an arrow next to the marked checkbox.
The Setup Menu
Return to Pg.1
to
to decrease the contrast and move
Page 15
Advertisement
Table of Contents
Troubleshooting
