Table of Contents
Advertisement
General
When you first enter the Setup Menu, the General tab will automatically be highlighted as the first menu group.
1. Press
to select this menu group, which will then highlight beep vol in the
bottom row of tabs.
This option controls whether you hear an audible beep when you press
buttons or not. 0 turns off the Beep function, while 1-4 adjust the volume
level of the Beep function.
2. Press
to activate the beep vol screen, which will then display an arrow
next to the marked checkbox.
3. Press
or
to move the arrowto the checkbox option you prefer.
4. Press
to mark the checkbox you've selected.
5. Press
to deactivate the beep vol screen and to enter the selection you made.
6. Press
to bring up the next bottom tab — resume.
This screen allows you to turn the Resume function off so that the RioVolt
SP250 will no longer pick up playing the same song at the same position
where it had left off when you powered it off last or when you switched to
the FM Tuner.
ON maintains the Resume function.
OFF discontinues the Resume function.
7. With the resume tab highlighted, press
By default the ON checkbox will be checked.
8. Press
to move the arrow to the OFF checkbox if you want to turn off the Resume function.
9. Press
to mark the checkbox you've selected.
10. Press
to deactivate the Resume screen and to enter your selection.
11. Press
to bring up the next bottom tab — vol step.
This screen allows you to select at what rate the Volume increases and
decreases. You can decrease the vol step to 20, but the default is set to 40
to allow you to fine tune your Volume levels.
12. Press
to activate the Volume Step screen, which will then display an
arrow next to the marked checkbox.
13. Press
to move the arrow to the 20 checkbox if you want to lower the vol step function.
14. Press
to mark the checkbox you've selected.
15. Press
to deactivate the Volume Step screen and to enter your selection.
16. Press
to bring up the next bottom tab — language.
By default this screen is set to EU & US for English, but if you prefer you
can select either Korea or Japan.
17. Press
to activate the Language screen, which will then display an arrow
next to the marked checkbox.
18. Press
or
to move the arrow to the the language checkbox you prefer.
19. Press
to mark the checkbox you've selected.
20. Press
to deactivate the Language screen and to enter your selection.
21. Press
to bring up the next bottom tab — cd esp.
CD ESP stands for CD Electronic Shock Protection. ESP adjusts the
amount of music that is stored to prevent skipping when the RioVolt is
jarred. The options are 40 seconds or 160 seconds for music CDs.
to activate the Resume screen.
The Setup Menu
Return to Pg.1
Page 14
Advertisement
Table of Contents
Troubleshooting
