Table of Contents
Advertisement
The
Tag Information
information available for each digital audio track you play. This information can include the Artist Name,
Album (CD) Title, Track Title, etc.
By default ON will be selected.
17. Press
to change the selection to OFF if you do not want to see the tag information.
18. Press
to mark the checkbox you've selected.
19. Press
to deactivate the Tag Information screen and to enter your selection.
20. Press
to highlight the next time tab.
21. Press
to activate the Time Information screen, which will then display
an arrow next to the marked checkbox.
The Time Information screen allows you to change the Track Time on
the display from showing the elapsed (Normal) time of the track being
played to the time remaining (Remain) in the track.
22. Press
or
to move the arrow to the checkbox you wish to select.
23. Press
to mark the checkbox you've selected.
24. Press
to deactivate the Time Information screen and to enter your selection.
This completes the list of options in the Display menu group.
Timer
The third menu group tab is timer. This menu allows you to adjust how long
the RioVolt remains on before going into Sleep mode or powering off.
1. Press
to highlight the timer tab.
2. Press
to select the timer tab and to highlight the sleep tab below.
3. Press
to activate the Sleep Power OFF screen, which will then display
an arrow next to the marked checkbox.
By default OFF will be selected.
However, by choosing ON and adjusting the sliding bar scale, you can set
the RioVolt to play for a set number of minutes before turning off; a handy
feature if you want to listen to your music as you fall asleep.
4. Press
to move the arrow to the ON checkbox.
5. Press
to mark the checkbox.
The number in the sliding bar scale slide will automatically change to 1.
6. Press
to increase the number of minutes shown in the sliding bar scale to
the desired number of minutes.
NOTE: To turn the Sleep mode off again, press
number of minutes shown in the sliding bar scale shows 0
and the OFF checkbox is marked.
7. Press
to deactivate the Sleep Power OFF screen and to enter your selection.
screen allows you to decide whether you want the display to show you the track
The Setup Menu
until the
Return to Pg.1
Page 16
Advertisement
Table of Contents
Troubleshooting
