Placing A Waypoint - Raymarine SL70RC PLUS Series User Manual

Chapter 5: Standard Chart Operations
At the end is a section about using the ST60/80 Navigator Keypad to select,
edit, and name your waypoints.

Placing a Waypoint

The scenario Place and Goto a Waypoint on page 2-28 provides a simple
example of how to place a waypoint.
➤ To access the place waypoint soft keys, press MARKS :
PLACE WPT
MARKS
MARKS
AT CURSOR
➤ To place a waypoint at the cursor position or at the vessel position:
1. Press either the PLACE WPT AT CURSOR or the PLACE WPT AT VESSEL soft
key. The waypoint is added to the waypoint list and tagged using the next
available number.
The waypoint soft keys are displayed until you move the cursor away from
the waypoint or press CLEAR .
You can use the EDIT WAYPOINT soft key to name the waypoint as
described in Editing Waypoints below.
2. Press CLEAR or ENTER to remove the place waypoint soft keys.
➤ To place a waypoint as latitude/longitude using the Waypoint List:
1. Press MARKS , followed by the WAYPOINT LIST soft key. The Waypoint List
MARKS
and associated soft keys are displayed.
2. Press the MAKE NEW WAYPOINT soft key followed by the LAT/LONG soft
key; the WPT POSITION (LAT/LONG) screen is displayed, with it's associated
soft keys. The waypoint is placed at the current vessel position, or if not
available, the cursor position.
PLACE WPT WAYPOINT
AT VESSEL LIST
D4169-1 D5572-1
D4163-1
5-9