Maintenance and troubleshooting
Code
Test
Code 101
Communication between antenna and ACU is being tested.
If failed, check the power and data cable connections.
Code 102
AZ CW limit switch is tested.
If failed check the limit switch, motor and belt for azimuth axis.
Code 103
AZ CCW limit switch is tested.
If failed check the limit switch, motor and belt for azimuth axis.
Code 104
EL axis is tested.
If failed check the limit switch, motor and belt for elevation axis.
Code 105
Sub-reflector is tested.
If failed, check sub-reflector.
Code 106
LNB tested.
If failed, check the LNB and control board.
55