Raymarine 45 STV User Manual page 15

Installation
To install the ACU:
1. Select the installation site, ensuring that the proposed site meets the criteria
described above.
2. Using the screws supplied fix the mounting brackets to the sides of the ACU.
3. Place the ACU in the position where it is going to be installed.
4. Connect the cables to the rear of the ACU.
5. Using a pencil, mark the 4 hole positions (2 each side) for securing the
mounting brackets.
6. Using a suitable drill bit, drill the 4 holes in the required position.
It is good practice to countersink the mounting holes to avoid damage to the
mounting surface.
7. Using suitable screws, secure the ACU into position.
13